How to use Melanotan 2

Mixing the solution

Flip off the cap from the Melanotan 2 Tanning Injection vial.

Wipe the surface of the top of the vial with the enclosed alcohol wipe and discard the wipe.

Wipe the surface of the injectable water tube (or glass water vial depending on the pack ordered) with the enclosed alcohol wipe and discard the wipe.

Remove the enclosed syringe from the packaging. Making sure the injectable water tube is upright, insert the needle of the syringe into the sidewall of the water.

Now pull back the plunger of the syringe so you withdraw 1ml of water and slowly pull the syringe out.

Insert the syringe into the Melanotan 2 Tanning Injection vial and depress the plunger so you completely empty the syringe of the water and slowly remove the syringe from the vial. Roll gently between your finger to help the solution to dissolve  do not shake the solution.

Place the Melanotan 2 solution in the fridge for storage until ready for use.

Make sure you put the syringe caps on and carefully dispose of it.

You have now mixed your Melanotan 2 Tanning Injection solution. Please store the mixed solution in the fridge, once mixed the solution can be stored refrigerated for up to six months. Unmixed the product can be stored in a cool dry place for up to twelve months.

Administering the Melanotan 2

Holding the Melanotan 2 Tanning Injection vial upright, insert the syringe in the middle of the grey cap.

Pull the plunger until you have 0.1ml of Melanotan 2 in the syringe and slowly remove it. 

Find a fleshy area of your skin – 4cm to the side of your belly button is the most common.  Wipe the area with one of the alcohol wipes included.

Pinch 2cm either side of the area to be injected.

Holding the syringe like a pen, and at 90 degrees to your skin, swiftly insert the syringe into your skin. 

Fully depress the plunger so all the Melanotan 2 has emptied from the syringe and slowly withdraw.

Hold the alcohol wipe on the injected area for a minute.

Once you’ve taken a few doses you may need to tilt the vial at an angle for the needle to be in the solution